Subli Glaze™ Clear

Subli Glaze™ Clear Sublimation Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Clear Sublimation Coating the image will not transfer.

Use it to

• Provide a polymer layer which sublimation inks can bond to allow effective image transfer.

How to use Subli Glaze™ Clear Sublimation Coating

1. Shake the can well for 1 minute.
2. Ensure the surface to be coated is clean, dry, and free from grease.
3. Apply Subli Glaze™ Clear Sublimation Coating smoothly and evenly, holding the can approx. 250mm (10″) from surface using light passes at room temperature, use multiple passes for a higher gloss finish but do not allow the spray to pool on the surface.
4. Allow to air dry for 10 minutes then cure in an oven at 160°C (320°F) for 15-20 minutes.

 Download the Clear Coating Subli Glaze™ Safety Data Sheet