• +91-93969 44045
  • 7 DAYS A WEEK FROM 10 AM TO 6 PM

Subli Glaze™ Industrial Coatings

Subli Glaze™ Clear Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 3-part gloss coating suitable for use on ceramics and metals.

Description Subli Glaze™

Clear Sublimation Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Clear Coating the image will not transfer.

Use it to

  • Provide a clear polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ Frosted Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

  • Touch dry after 2 hours.
  • Hard dry after 24 hours.
  • Fully cured after 72 hours.

Force cure at 200 ºC for 15 to 20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Frosted Coating mix with:

    • 1.65ltrs of SG75 Subli Glaze™ Hardener
    • 250ml of SG80 Subli Glaze™ Catalyst

For 25ltrs of Subli Glaze™Frosted Coating mix with:

  • 8.25ltrs of Subli Glaze™ Hardener
  • 1.25ltrs of Subli Glaze™ Catalyst

Order Instructions

For 5ltrs please order:

    • 1x SG01 Subli Glaze™ Clear Coating 5ltr
    • 2x SG75 Subli Glaze™ Hardener 1ltr
    • 1x SG80 Subli Glaze™ Catalyst 250ml

For 25ltrs please order:

  • 1x SG02 Subli Glaze™ Clear Coating 25ltr
  • 2x SG76 Subli Glaze™ Hardener 5ltr
  • 1x SG80 Subli Glaze™ Catalyst 250ml
  • 1x SG81 Subli Glaze™ Catalyst 1ltr

Subli Glaze™ Frosted Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 3-part frosted coating suitable for use on glass.

Description

Subli Glaze™ Frosted Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Frosted Coating the image will not transfer.

Use it to

  • Provide a frosted polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ Frosted Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

  • Touch dry after 2 hours.
  • Hard dry after 24 hours.
  • Fully cured after 72 hours.

Force cure at 200 ºC for 15 to 20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Frosted Coating mix with:

    • 1.65ltrs of SG75 Subli Glaze™ Hardener
    • 250ml of SG80 Subli Glaze™ Catalyst

For 25ltrs of Subli Glaze™Frosted Coating mix with:

  • 8.25ltrs of Subli Glaze™ Hardener
  • 1.25ltrs of Subli Glaze™ Catalyst

Order Instructions

For 5ltrs please order:

    • 1x SG05 Subli Glaze™ Frosted Coating 5ltr
    • 2x SG75 Subli Glaze™ Hardener 1ltr
    • 1x SG80 Subli Glaze™ Catalyst 250ml

For 25ltrs please order:

  • 1x SG06 Subli Glaze™ Frosted Coating 25ltr
  • 2x SG76 Subli Glaze™ Hardener 5ltr
  • 1x SG80 Subli Glaze™ Catalyst 250ml
  • 1x SG81 Subli Glaze™ Catalyst 1ltr

Subli Glaze™ Wood Coating

Available in 5ltr and 25ltr sizes

This product is a water based 2-part coating suitable for use on wood.

Description Subli Glaze™

Subli Glaze™ Wood Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Wood Coating the image will not transfer.

Use it to

  • Provide a clear polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 5 hours. Clean using with clean warm water.

How to use Subli Glaze™ Wood Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

  • Touch dry after 2 hours.
  • Hard dry after 24 hours.
  • Fully cured after 72 hours.

Force cure at 80ºC for 15 to 25 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Wood Coating mix with:

    • 100ml of SG85 Subli Glaze™ Activator

For 25ltrs of Subli Glaze™Wood Coating mix with:

  • 500ml of Subli Glaze™ Activator

Order Instructions

For 5ltrs please order:

    • 1x SG10 Subli Glaze™ Wood Coating 5ltr
    • 1x SG85 Subli Glaze™ Activator 250ml

For 25ltrs please order:

  • 1x SG11 Subli Glaze™ Wood Coating 25ltr
  • 2x SG85 Subli Glaze™ Activator 250ml

Subli Glaze™ UV Protection

Available in 5ltr and 25ltr sizes

This product is a solvent based coating for use on products that are exposed to sunlight.

Description Subli Glaze™

Subli Glaze™ UV Protection Coating can be applied at the end of the sublimation process (after the image has been transferred), to add a layer of protection against ultra violet radiation. Exposure to ultra violet light (i.e. Sunlight) can over time cause image fade; Subli Glaze UV Protection Coating protects against the effects of UV image fade.

Use it to

  • Protect transferred images against fading due to prolonged exposure to Ultra Violet light.

Important Information

Lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ UV Protection

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

  • Touch dry after 10 minutes.
  • Hard dry after 4 hours.
  • Fully cured after 24 hours.

Force cure at 80ºC for 5 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ UV Protection:

    • Use neat from the tin do not mix or thin this product

For 25ltrs of Subli Glaze™ UV Protection:

  • Use neat from the tin do not mix or thin this product

Order Instructions

For 5ltrs please order:

    • 1x SG15 Subli Glaze™ UV Protection 5ltr

For 25ltrs please order:

  • 1x SG16 Subli Glaze™ UV Protection 25ltr

Subli Glaze™ White Base Coating

Available in 1ltr and 5ltr sizes

This product is a solvent based 2-part white base coating suitable for use on metals, glass, ceramic, and certain plastics.

Description Subli Glaze™

Subli Glaze™ White Base Coating is used when working with dark coloured substrates or substrates that do not allow any light to pass through them. Subli Glaze™ White Base Coating is applied before the Subli Glaze™ Clear Sublimation Coating to give the substrate a white background on which to transfer the image. The coating is applied wet on wet which means you do not need to dry the white base coating before applying Subli Glaze™ clear coating.

Use it to

  • Provide a solid white background on which to transfer an image.
  • Maximise the effect of the transfer of the image.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ White Base Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

  • Touch dry after 2 hours.
  • Hard dry after 24 hours.
  • Fully cured after 72 hours.

Force cure at 200 ºC for 15-20 minutes.

Mixing Instructions

For 1ltrs of Subli Glaze™ White Base Coating mix with:

    • 500ml of SG75 Subli Glaze™ Hardener

For 5ltrs of Subli Glaze™ White Base Coating mix with:

  • 2.5ltrs of Subli Glaze™ Hardener

Order Instructions

For 1ltrs please order:

    • 1x SG78 Subli Glaze™ White Base Coating 1ltr
    • 1x SG75 Subli Glaze™ Hardener 1ltr
    • 1x SG01 Subli Glaze™ Clear Coating 5ltr

For 5ltrs please order:

  • 1x SG20 Subli Glaze™ White Base Coating 5ltr
  • 3x SG75 Subli Glaze™ Hardener 1ltr
  • 1x SG01 Subli Glaze™ Clear Coating 5ltr

Subli Glaze™ Translucent Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 4-part translucent coating suitable for use on glass and acrylics.

Description

Subli Glaze™ Translucent Coating is used when working with clear substrates such as glass or acrylics, where the image needs to be transferred to the back of the substrate, allowing light to pass through it. Subli Glaze™ Translucent Coating is applied after Subli Glaze™ Clear Coating is applied. The image transfers through the white coating so when viewed from the correct side the image has a white background. The coating is applied wet on wet which means you do not need to dry the white base coating before applying Subli Glaze™ clear coating.

Use it to

  • Provide a translucent white background which the image is transferred through.
  • Allow light to pass through the coating to illuminate the image.

How to use Subli Glaze™ Translucent Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

  • Touch dry after 2 hours.
  • Hard dry after 24 hours.
  • Fully cured after 72 hours.

Force cure at 200 ºC for 15-20 minutes.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

Mixing Instructions

For 5ltrs of Subli Glaze™ Translucent Coating mix with:

    • 1.65ltrs of SG75 Subli Glaze™ Hardener
    • 250ml of SG80 Subli Glaze™ Catalyst

For 25ltrs of Subli Glaze™ Translucent Coating mix with:

  • 8.25ltrs of Subli Glaze™ Hardener
  • 1.25ltrs of Subli Glaze™ Catalyst

Order Instructions

For 5ltrs please order:

    • 1x SG30 Subli Glaze™ Translucent Coating 5ltr
    • 2x SG75 Subli Glaze™ Hardener 1ltr
    • 1x SG80 Subli Glaze™ Catalyst 250ml
    • 1x SG01 Subli Glaze™ Clear Coating 5ltr

For 25ltrs please order:

  • 1x SG31 Subli Glaze™ Translucent Coating 25ltr
  • 2x SG76 Subli Glaze™ Hardener 5ltr
  • 1x SG80 Subli Glaze™ Catalyst 250ml
  • 1x SG81 Subli Glaze™ Catalyst 1ltr
  • 1x SG02 Subli Glaze™ Clear Coating 25ltr

Subli Glaze™ Catalyst

Available in 250ml and 1ltr sizes

Subli Glaze™ Activator

Available in 250ml and 1ltr sizes

Subli Glaze™ Hardener

Available in 1ltr and 5ltr sizes

Subli Glaze™ White Base Hardener

Available in 1ltr and 5ltr sizes
BACK TO TOP