• +91-93969 44045
  • 7 DAYS A WEEK FROM 10 AM TO 6 PM
Subli Glaze™ Frosted Coating
  • SKU: SG05
  • Availability: in stock Many in stock Out of stock You can purchase this product but it's out of stock

Subli Glaze™ Frosted Coating

Rs. 16,500.00

Available in 5ltr and 25ltr sizes

 

This product is a solvent based 3-part frosted coating suitable for use on glass.

 

Description

Subli Glaze™ Frosted Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Frosted Coating the image will not transfer.

 

Use it to

  • Provide a frosted polymer layer which sublimation inks can bond to allow effective image transfer.

 

Important Information

Once mixed lacquer should be used within 3 hours.

Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ Frosted Coating

Spray using a conventional spray gun and cure by drying.

 

Typical drying times at room temperature are:

  • Touch dry after 2 hours.
  • Hard dry after 24 hours.
  • Fully cured after 72 hours.

 

Force cure at 200 ºC for 15-20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Frosted Coating mix with:

  • 1.65ltrs of SG75 Subli Glaze™ Hardener
  • 250ml of SG80 Subli Glaze™ Catalyst

 

For 25ltrs of Subli Glaze™ Frosted Coating mix with:

  • 8.25ltrs of Subli Glaze™ Hardener
  • 1.25ltrs of Subli Glaze™ Catalyst

 

Order Instructions

For 5ltrs please order

  • 1x SG05 Subli Glaze™ Frosted Coating 5ltr
  • 2x SG75 Subli Glaze™ Hardener 1ltr
  • 1x SG80 Subli Glaze™ Catalyst 250ml

 

For 25ltrs please order

  • 1x SG06 Subli Glaze™ Frosted Coating 25ltr
  • 2x SG76 Subli Glaze™ Hardener 5ltr
  • 1x SG80 Subli Glaze™ Catalyst 250ml
  • 1x SG81 Subli Glaze™ Catalyst 1ltr

Download the Subli Glaze™ Frosted Coating Safety Data Sheet

RELATED PRODUCTS

BACK TO TOP